New England Copper ablative bottom paint provides full season antifouling protection in cold, low fouling waters against barnacles, algae and hydroids in both salt and fresh water. New England Copper features an ablative copolymer base to render a smooth finish with durability and abrasion resistance. This paint releases its biocide by the exposure of paint film to the water. Universal application over all types of properly prepared bottom paints (except aluminum). For use in low fouling and cold waters where fouling challenge is low.
Choose Colors At Checkout Red - Green - Blue - Black
Blue Water Marine Copper Pro SCX 67 ablative is the highest performance ablative copolymer ablative bottom paint available. This is a tough, multi-season paint for superior protection against hard and soft growth in extreme fouling conditions, and can re-launch after extended haul-out while retaining original antifouling properties. Copper Pro SCX 67 has the highest copper content (67%), and the performance booster Slime Control Xtra provides outstanding protection against slime, grass, and weed. Perfect for powerboats and sailboats, and can be applied directly over properly prepared ablatives, epoxies and vinyls, and most any other hard or ablative bottom paints. Available in gallons or quarts. Choose from Royal Blue, Marine Black, Admiral Green, Regatta Red, or Bright Blue.
Choose Color At Checkout Blue - Green - Black - Red
"Copper Pro SCX 67 was the ONLY product rated "EXCELLENT" in the high copper ablative category at both test sites, and beat Interlux Micron Extra, Micron 66, Micron CSC, and beat Pettit Ultima Pro, Ultima SR, and beat Seahawk Biocop TF, Cukote, Cukote Biocide Plus & Islands 77, and West Marine PCA & CPP hands down." - March, 2009 - Powerboat Reports.
Copper Shield 45 is a multi-season ablative bottom paint with 45% cuprous oxide content for protection in moderate fouling waters. The paint's copolymer base renders a smooth finish with durability and abrasion resistance. Copper Shield 45 provides anti-fouling protection against barnacles, algae and hydroids in salt and fresh water on boat bottoms only. Blue Water Copper Shield 45 has universal application over all types of properly prepared bottom paints (except aluminum). It can be applied directly over properly prepared ablatives, epoxies, and vinyls, and most any other hard or ablative bottom paints. This ablative is perfect for powerboats and sailboats, fast fiberglass boats, as well as wood and steel hulls. Available in gallons or quarts. Choose from Royal Blue, Marine Black, Admiral Green, Regatta Red, or Bright Blue. Coppershield 45.
"Copper Shield 45 was the ONLY product rated "EXCELLENT" in the mid copper ablative category, and beat Interlux Micron CSC, Fiberglass Bottomkote ACT, and beat Pettit Horizons, Ultima, Ultima SSA, and beat Seahawk AF-33, Cukote, Mission Bay, and West Marine CPP and PCA hands down", March, 2009 - Powerboat Reports.
Complete zinc anode kit for 1991 and newer Mercruiser Alpha One Gen II drives (s/n 0D469829 and up).
Kit includes:
Mallory Riser 4" exhaust outlet 7 degree down angle. For late model I/O & inboards. (Use Mounting Kit 9-40578). Sold Individually.
Mallory Mercruiser Water Pump Kit for all inboards w/o block drain and Bravo 1 2 and 3.. Sold individually
Copper Shield 35 UNO provides ablative antifouling protection against barnacles, algae and hydroids in salt and fresh water on boat bottoms only. Its ablative copolymer base renders a smooth finish with durability and abrasion resistance. Copper Shield 35 UNO releases biocide by the constant exposure of new paint film to the water. Copper Shield 35 has universal application over all types of properly prepared bottom paints (except aluminum). For use on fast fiberglass boats, as well as wood and steel hulls.
Mallory permanent magnet starter replaces Mercruiser 50-864340A2, OMC 3854751, Volvo 3856004 offset bolt patern. For GM engines with 14" flywheel.
Mallory Manifold fits both sides of 305 - 350 CID V8 engines. (Use Mounting Kit 9-40573)Sold Individually.